A
Snap-off 0.9
Contractor Pencil
A flat, razor-thin graphene pencil blade. It marks a clean line and it just keeps on marking.
Graphlene Contractor Pencil
This razor thin pencil
blade
Made from graphene. It just keeps on marking. One handle, two blades.
- BladeGraphene
- Format18mm snap-off
- BodySolid extruded aluminum
- Blade changesBuilt-in 6mm Allen key
One handle. Two blades.
A pencil on one side.
A razor on the other.
One side of the handle is a razor blade; the other side is a pencil blade. Mark it, then cut it, without reaching for a second tool.
B
Snap-off 18mm
Contractor Razor
A standard 18mm snap-off razor blade on the other side of the same handle. The razor blade thumb slider has a unique locking system.
Blade sizes
Three thicknesses. One standard.
Pick the line you need. The 0.9mm medium blade is the standard.
01
Fine
The same thickness as a razor blade. For the finest line.
02 Standard
Medium
The everyday blade, and the standard.
03
Heavy-duty
A thicker blade for heavier marking.
01
Take off the back
Remove the screw and the back comes off.
02
Allen key storage
The Allen key is stored right inside the tool, so it is always with you.
03
Change the blade
Swap in a new pencil blade or razor blade, or change to a different color.
The handle
Built like a long-lasting tool.
Every detail is there to keep the blade steady and the line clean.
18mm
Snap-off handle format
The familiar 18mm snap-off handle, in your hand all day.
Center
Center click system
The click is centered so it doesn't torque the blade assembly, thus lasting years longer.
6mm
Hidden Allen key
A 6mm Allen key is built into the handle for blade changes. No hunting for a wrench.
Alu
Solid extruded aluminum body
A solid extruded aluminum body with "Contractor Pencil" on the side.
Tip / End
Aluminum tip, rubber back end
Mark
Engraved thumb slider
"Graphlene" is engraved on the thumb slider.
Speed square. 90-degree corners.
Marks right into the corner.
A speed square has a quarter-inch thick square edge. A round pencil can't reach into the corner.
The flat 0.9mm blade edge sits flush against the square and marks right in the corner, so your line starts exactly where it should.
- Flat blade edge rides tight to the square
- Reaches into a 90-degree corner
- Works along a quarter-inch thick square edge
Colors
Your color, on the job site.
- Chalk blue
- Red
- White
- Black
- Fluorescent orange
Get one
Coming soon.
The Graphlene Contractor Pencil isn't available yet. Leave your email to hear when it is.
Sign-up isn't open yet. Check back soon.
FAQ
Questions
What is it?
The Graphlene Contractor Pencil is a razor-thin pencil blade made from graphene, in an 18mm snap-off handle. It lasts forever and just keeps on marking. One side of the handle is a razor blade and the other side is a pencil blade.
What blade sizes are there?
Three: fine 0.7mm (the same thickness as a razor blade), medium 0.9mm (the standard), and heavy-duty 1.2mm.
How do I change the blade?
A 6mm Allen key is hidden in the handle. Use it for blade changes.
Will it mark into a corner or along a speed square?
Yes. A speed square has a quarter-inch thick square edge, and a round pencil can't reach into the corner. The flat 0.9mm blade edge marks right in the corner.
Does the click twist the blade?
No. The click system is centered, so it doesn't torque the blade.
What colors will it come in?
Colors are chalk blue, red, white, black and fluorescent orange.
What is the center click?
The click is centered so it doesn't torque the blade assembly, thus lasting years longer.